Where Can I Get My Canon Camera Cleaned

Solution

If dust adheres to the epitome sensor and dust spots appear on the images, y'all tin can clean the image sensor yourself with a commercially-available photographic camera blower.

IMPORTANT

• The epitome sensor is extremely delicate. If the sensor needs to be cleaned straight, having it done by a Canon Service Center is recommended.
• Make sure to use a fully-charged battery.

1. Detach the lens before yous kickoff cleaning.

2. Set the shooting style to a Creative Zone style.

3. Press the <MENU> button to bring up the card display.

4. Select [ ] tab, [Make clean manually], and so press the <> button.

v. Select [OK], and then press the <> button.

6. The reflex mirror will lock up and the shutter will open.

7. Using a commercially bachelor blower, accident dust that is stuck to the surface while preventing the blower from directly touching the sensor.

9. Turn off the power.

CAUTION

• While cleaning the sensor, never do whatsoever of the following. If the ability is cut off, the shutter will close and the shutter defunction and prototype sensor may get damaged.

- Opening the card slot/bombardment compartment cover.

• The surface of the paradigm sensor is extremely delicate. Make clean the sensor with care.
• Employ a plain blower without any brush attached. A castor tin can scratch the sensor.
• Do non insert the blower tip within the camera beyond the lens mount. If the power is turned off, the shutter will close and the shutter defunction or reflex mirror may go damaged.
• Never use pressurized air or gas to clean the sensor. Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it.
• If the battery level becomes low while cleaning the sensor, the beeper volition sound as a warning. Stop cleaning the sensor.
• If a smudge that cannot be removed with a blower remains, having the sensor cleaned past a Canon Service Heart is recommended.

Source: https://asia.canon/en/support/8203786300

Posted by: geiersquou2000.blogspot.com

Share this post